The industrial gas leak detector CHCOind has been designed and built according to European

regulations to detect the presence of two types of gases such as methane and carbon monoxide.

The first gas detected is methane-propane with trip sensitivity calibrated at 10% of L.E.L.

The second gas detected is carbon monoxide, when both the maximum CO admissible

concentration threshold of 300ppm is exceeded, and when low CO concentrations persist in the

environment for lengthy periods, which according to the principle of accumulation could also

damage the human organism.

• Power supply: 230 VAC 50/60 Hz
• Power demand: 1W
• Alarm relay 1: Explosive gas
• Alarm relay 1: Toxic gas
• Gas sensor: Catalytic
• Gas sensor: Electrochemical Cell
• Explosive alarm: at 10% LEL
• Toxic Alarm: from 30 ppm to 300 ppm
• Protection degree: IP65
• Installation: wall-mounted
• Enclosure and protection: ABS – IP65